_posts/sysadm/2023-06-24-directly-attache-storage-with-redundancy-and-integrity-using-lvm-lvmraid.tl

@@ -40,8 +40,6 @@ on LV:
 # lvcreate --type raid1 --mirrors 1 -n backup -L 4t vgbackup /dev/sda /dev/sdb
 # cat /sys/class/block/nvme0n1/queue/logical_block_size
 512
-# dumpe2fs -h /dev/vgbackup/backup | grep 'Block size'
-Block size:               4096
 # lvconvert --raidintegrity y --raidintegrityblocksize 4096 --raidintegritymode bitmap /dev/vgbackup/backup
 # mkfs.ext4 -b 4096 -O ^has_journal /dev/vgbackup/backup
 {% endhighlight %}

_posts/sysadm/2023-09-15-lvm-cheat-sheet.tl

@@ -34,7 +34,7 @@ If problems are found, this is denoted by @m@ on 9th bit of attributes displayed
 by @lvs@:
 
 {% highlight bash %}
-# lvs
+$ cat /tmp/lvs
 LV      VG    Attr       LSize  Pool Origin Data%  Meta%  Move Log Cpy%Sync  Convert
 backup  vgdev rwi-aor-m- 4.00g                                     100.00
 {% endhighlight %}
@@ -58,8 +58,7 @@ bq. Integrity limitations
 pvmove, snapshots, splitmirror, raid syncaction commands, raid rebuild.
 
 That means commands like @lvchange --syncaction repair@ or @lvchange --rebuild@
-*should not be run* on RAID with integrity. They can give misleading results,
+won't work as expected.
-e.g. signal mismatch when there is none.
 
 If RAID1 with integrity LV requires refresh (partial synchronization) due to
 e.g.  device write errors, but both PVs are otherwise available, take the
@@ -83,8 +82,7 @@ so the process must be performed manually:
 {% endhighlight %}
 
 * check integrity of both RAID1 parts:
-** whether they differ at all (this may be time consuming and it may be more
+** whether they differ at all:
-appropriate to proceed directly to file content comparison instead):
 {% highlight bash %}
 # sha512sum /dev/vgdev/backup /dev/vgdev/backup_split
 {% endhighlight %}
@@ -94,19 +92,11 @@ appropriate to proceed directly to file content comparison instead):
 # fsck.ext4 -n -f /dev/vgdev/backup_split
 {% endhighlight %}
 ** once filesystems are fixed and can be mounted, compare file content to
-determine which mirror is valid (no output from @rsync@ means no differences):
+determine which mirror is valid:
 {% highlight bash %}
 # mount /dev/vgdev/backup /mnt/mirror1
-# mount /dev/vgdev/backup_split /mnt/mirror2
+# mount /dev/vgdev/backup_split /mnt/mirror1
-# rsync -n -c -a --delete --progress /mnt/mirror1 /mnt/mirror2
+# rsync -d /mnt/mirror1 /mnt/mirror2
 {% endhighlight %}
 
-* finally remove invalid mirror, recreate RAID1, re-add integrity layer and
+* finally remove invalid mirror, recreate RAID1 and re-add integrity layer
-discard unused space if necessary
-
-
-h2. SSD related maintenance
-
-h3. Discard unused space
-
-* OWC does not support TRIM

assets/css/styles.css

@@ -43,7 +43,6 @@ h3 {
   font-size: 1rem;
   font-weight: bold;
   margin-top: 2rem;
-  margin-bottom: 0.6em;
 }
 p, ul {
   line-height: 1.35rem;
@@ -78,8 +77,8 @@ figcaption {
 figcaption .lang {
   color: #606060;
   font-weight: bold;
-  font-size: 0.7rem;
+  font-size: 0.8rem;
-  line-height: 1.3rem;
+  line-height: 1.5rem;
   padding: 0 0.4rem;
 }
 pre {
@@ -124,5 +123,5 @@ a:hover {
 
 em {
   color: #505050;
-  font-size: 0.85rem;
+  font-size: 0.9rem;
 }